Exact Dimension Guide 1200 Sq Ft Pole Barns & Metal Buildings

How Much Concrete Do You Need for a 30×40 Slab?

Calculate the exact ready-mix yardage, 80-lb and 60-lb bag counts, subbase gravel, and rebar reinforcement needed for a 30×40 concrete slab (1200 sq ft).

Instant Concrete Estimate — 30×40 Slab (1200 sq ft)
Includes recommended 10% waste factor
4-Inch Thick Slab
16.3 Cubic Yards

Exact net volume: 14.81 yd³ (400 cu ft)

734 80 lb bags (+10%)
or
978 60 lb bags (+10%)

Standard application: Pedestrian walkways, back patios, gazebo bases, small garden sheds.

Ready-Mix Truck vs. Bagged Recommendation: Commercial ready-mix delivery required: order 16.5 yd³ for 4", or 24.5 yd³ for 6" with 10% waste (3 to 4 ready-mix trucks). Plan a dedicated pour crew with a power trowel.

Customize Your 30×40 Slab Calculation

The calculator below is pre-configured for a 40′ × 30′ slab. Modify thickness, waste percentage, or local price per yard to calculate exact costs in real time:

Enter Dimensions

Quick Presets:

Separate dimensions with x and entries with commas. Use positive decimal dimensions.

Enter length x width in decimal feet, separated by commas. Example: 4x5, -2x3 adds 20 ft² and deducts 6 ft². Use non-overlapping sections at the same depth.

Standard residential slabs are 4 in thick

Results

Concrete Required
22.222 yd³
Standard US ready-mix order unit

Equivalent

1,334 × bags 60 lb Bags (raw) Exact volume only — no waste allowance
1,000 × bags 80 lb Bags (raw) Exact volume only — no waste allowance
1,467 × bags 60 lb Bags (+ 10% waste) Recommended order quantity including 10% waste allowance
1,100 × bags 80 lb Bags (+ 10% waste) Recommended order quantity including 10% waste allowance
600 ft³ Cubic Feet
16.99 m³ Cubic Meters
Your layout

Recommended Order:  24.44  yd³

Includes 10% waste allowance (5–15% typical for this material)

Simple rectangular slabs: 5–10% is adequate. Add 15% for complex shapes or uneven subgrade.

Estimated Cost Market Rate
$2222  –  $3889 per cubic yard (ready-mix)

Based on current market rates. Actual cost varies by region, supplier, and project complexity.

Enter Your Price
$
Estimated total $0.00

How to measureSlab dimensions diagram

Length Width Thickness Volume = length × width × thickness
Slab dimensions diagram
Concrete slab: length × width × thickness — enter each dimension above to calculate volume.

30×40 Slab Concrete Volume & Bag Chart

Reference table comparing exact net volume and recommended order amounts across standard residential slab thicknesses for 1200 square feet:

Slab Thickness Recommended For Net Cu Ft Net Cu Yds Order (Yds + 10%) 80 lb Bags (+10%) 60 lb Bags (+10%)
4 Inches Sidewalks, Patios, Light Sheds 400 ft³ 14.81 yd³ 16.3 yd³ 734 978
5 Inches Workshops, Carports, Light Trucks 500 ft³ 18.52 yd³ 20.37 yd³ 917 1223
6 Inches Recommended Two-Car Garages, RVs, Hot Tubs 600 ft³ 22.22 yd³ 24.44 yd³ 1100 1467
8 Inches Heavy Machinery, Farm Slabs 800 ft³ 29.63 yd³ 32.59 yd³ 1467 1956

* Bag calculations assume 0.60 cu ft per 80-lb bag and 0.45 cu ft per 60-lb bag, with a 10% safety allowance for subbase compaction and forms.

Engineering & Code Specifications for a 30×40 Slab

Guidelines aligned with American Concrete Institute standard ACI 302.1R (Guide for Concrete Floor and Slab Construction) and IRC Section R506:

Subbase & Compaction

6" to 8" compacted crusher run or #57 crushed rock over proof-rolled native subgrade

Rebar & Mesh Reinforcement

#4 rebar at 16" on-center grid on 2.5" chairs, or #5 rebar under forklift/tractor traffic lanes

Contraction & Control Joints

Saw-cut in a 3×4 grid creating twelve 10×10 ft panels; maximum joint spacing 10 to 12 ft

Mix Strength & Curing

Specify 3,500 to 4,000 PSI ready-mix concrete with 5% to 7% air entrainment in cold climates. Moist cure with wet burlap or spray a curing compound (ASTM C309) for a minimum of 7 days before traffic.

Project Design Notes for 30×40 (Pole Barn / Metal Building Slab)

A 30×40 slab (1,200 sq ft) is the most sought-after size for agricultural pole barns, commercial shops, and barndominiums. Pouring this slab requires staging concrete delivery trucks in 30–45 minute intervals, screeding with a motorized truss screed or laser screed, and timing power trowel operations carefully to avoid surface crusting.

Estimated Cost for a 30×40 Concrete Slab

DIY / Ready-Mix Delivery Only
$2038 – $4033

Concrete material cost delivered to your jobsite ($125 to $165 per cubic yard). Excludes wooden forms, rebar, gravel subbase, and tool rental.

Turnkey Professional Installation
$7,200 – $14,400

Typical contractor turnkey rate ($6 to $12 per sq ft for 1200 sq ft). Covers site excavation, formwork, crushed stone base, rebar grid, pour, screed, and broom finish.

Explore Other Concrete Slab Sizes

Frequently Asked Questions: 30×40 Slab

How many cubic yards of concrete do I need for a 40x30 slab at 4 inches thick?

For a 30×40 slab at 4 inches thick (1200 sq ft), you need exactly 14.81 cubic yards (400 cubic feet) of concrete. When ordering ready-mix concrete, contractors recommend adding a 10% waste allowance for subbase irregularities and spillage, bringing your recommended order to 16.3 cubic yards. The formula is: (40 ft × 30 ft × 0.333 ft) ÷ 27 = 14.81 yd³.

How many 80 lb bags of Quikrete do I need for a 40x30 slab?

For a 4-inch thick 30×40 slab, you will need 734 eighty-pound bags of concrete (or 978 sixty-pound bags), which includes a 10% safety margin. If pouring a heavy-duty 6-inch slab, you will need 1100 eighty-pound bags (or 1467 sixty-pound bags). Each standard 80-lb bag yields approximately 0.60 cubic feet of mixed concrete.

Should a 40x30 slab be 4 or 6 inches thick?

Choose your slab thickness based on intended use: A 4-inch pour (16.3 yd³ with waste) is standard for pedestrian patios, walkways, and small garden sheds holding under 100 sq ft. A 5 to 6-inch pour (24.44 yd³ with waste) reinforced with #4 rebar on an aggregate subbase is strongly recommended for garage floors, carports, RV pads, hot tubs, or any application supporting vehicle axle weights per ACI 302.1R and IRC R506.

How much does a 40x30 concrete slab cost?

Ready-mix concrete delivery costs between $125 and $165 per cubic yard. For a 4-inch 30×40 slab (16.3 yd³ ordered), materials will cost approximately $2038 to $2690. For a 6-inch slab (24.44 yd³ ordered), ready-mix concrete runs $3055 to $4033. A complete turnkey installation by a concrete contractor (including grading, forms, gravel base, rebar, pour, and finishing) typically ranges from $6.00 to $12.00 per sq ft, or $7,200 to $14,400 total for 1200 sq ft.