Deck Footing Calculator
Estimate the number of deck footings and the concrete to fill them. Enter your deck dimensions and grid spacing to estimate a full rectangular support grid and concrete volume. Ledger attachments and beam layouts are not modeled. Footing size and spacing should follow your local code and the loads your deck will carry.
How to measureDeck Footing Diagram
How the Formula Works
Calculate footings along each dimension
Posts per side = ⌈Deck Length ÷ Spacing⌉ + 1 Each dimension needs end posts plus one post per full span — partial spans round up
Calculate total footing count
Footings = Posts along length × Posts along width Footings form a grid across the deck footprint
Calculate volume of one cylindrical footing
Volume (ft³) = π × (Diameter ÷ 2 ÷ 12)² × (Depth ÷ 12) Diameter and depth are converted from inches to feet before applying the cylinder formula
Calculate total concrete
Total (yd³) = (Volume per hole × Footings) ÷ 27 Calculate bags
Bags = ⌈Total (ft³) ÷ 0.60⌉ One 80 lb bag of concrete mix yields 0.60 cubic feet — always round up
Deck Footing Count & Concrete Volume Reference
Illustrative full grid at maximum 8-foot spacing in both directions, 36-inch cylindrical depth, no waste. These are quantities, not approved layouts or frost depths:
| Deck Size (ft) | Hole Diameter | Footing Count | Cubic Yards | 80 lb Bags |
|---|---|---|---|---|
| 10′ × 10′ Deck | 8" | 9 | 0.35 | 16 |
| 10′ × 10′ Deck | 10" | 9 | 0.55 | 25 |
| 12′ × 12′ Deck | 10" | 9 | 0.55 | 25 |
| 12′ × 12′ Deck | 12" | 9 | 0.79 | 36 |
| 12′ × 16′ Deck | 10" | 9 | 0.55 | 25 |
| 12′ × 16′ Deck | 12" | 9 | 0.79 | 36 |
| 16′ × 20′ Deck | 10" | 12 | 0.73 | 33 |
| 16′ × 20′ Deck | 12" | 12 | 1.05 | 48 |
| 20′ × 20′ Deck | 10" | 16 | 0.97 | 44 |
| 20′ × 20′ Deck | 12" | 16 | 1.40 | 63 |
Frequently Asked Questions
The number of footings depends on your deck dimensions and post spacing. The formula is: footings = (ceil(length ÷ spacing) + 1) × (ceil(width ÷ spacing) + 1). A 12 × 16 ft deck with 8 ft spacing needs (ceil(16/8)+1) × (ceil(12/8)+1) = 3 × 3 = 9 footings in this full-grid model. An attached deck with a ledger and one beam, or a freestanding deck with two beam lines, has a different layout. Use an approved framing plan to choose the actual support count; this tool does not design it.
Use the locally approved frost-protection and foundation detail. Regional depth estimates are not a project-specific footing-depth requirement.
Use the footing diameter from the approved support schedule, based on loads, framing layout and allowable site bearing pressure. This calculator does not size footings.
Use the support spacing and beam/joist layout from the approved framing plan. This calculator only estimates a full rectangular support grid.
Obtain required founding depth and footing thickness from the approved detail and local requirements. Do not automatically add six inches to a frost-depth estimate.
A 12-inch diameter hole at 42 inches deep holds about 2.749 cubic feet of concrete, which is 5 bags before waste of 80 lb Quikrete (each bag yields 0.60 cu ft). Use the calculator above to get the exact bag count for your footing diameter and depth. For large jobs, ordering ready-mix is more economical than bags.
Use tube forms according to the approved footing detail and manufacturer instructions. This calculator models cylindrical volume; it does not specify excavation support or construction methods.
Use the approved reinforcement schedule for bars, ties, cover and anchorage. This calculator does not determine reinforcement from footing depth.