Free Imperial & Metric Updated Nov 2026

Sand Calculator

Calculate how much sand you need for paver bedding, fill, or mixing, in volume and weight. Enter the area and depth to get cubic yards and tons. Handy for leveling layers under pavers and slabs where a consistent depth matters.

Enter Dimensions

Enter length x width in decimal feet, separated by commas. Example: 4x5, -2x3 adds 20 ft² and deducts 6 ft². Use non-overlapping sections at the same depth.

Paver base: 1 in. Leveling: 0.5–1 in. Sandbox: 6–12 in.

Default is 1.35 tons/yd³. Actual density varies by moisture and material type.

Results

Cubic Yards
0.617 yd³
Standard US sand order unit
0.833 tons Tons of Sand
16.667 ft³ Cubic Feet
0.472 m³ Cubic Meters
Your layout

Recommended Order:  0.68  yd³

Includes 10% waste allowance (10–15% typical for this material)

Account for spillage and spreading variation, especially on sloped or uneven surfaces. Add up to 15% on irregular or sloped areas.

Enter Your Price
$
Estimated total $0.00

How to measureSand Area Diagram

Top view Length Width Side view Sand Depth
Sand Area Diagram
Measure the footprint and vertical sand depth. Weight depends on the density used in the estimate.
ƒ

How the Formula Works

1

Convert depth to feet

Depth (ft) = Depth (in) ÷ 12

All dimensions must share the same unit before multiplying

2

Calculate volume in cubic feet

Volume (ft³) = Length (ft) × Width (ft) × Depth (ft)
3

Convert to cubic yards

Volume (yd³) = Volume (ft³) ÷ 27

There are 27 cubic feet in one cubic yard — the standard US sand order unit

4

Calculate tons of sand

Tons = Cubic Yards × Density

Dry loose sand weighs approximately 2,700 lbs per cubic yard (1.35 short tons)

Sand Volume & Weight for Pavers, Sandboxes & Leveling

Calculated cubic yards and US short tons at standard density (1.35 tons per cubic yard):

Application / SizeArea (sq ft)Depth (in)Cubic YardsTons (1.35 t/yd³)
4′ × 4′ Sandbox164"0.200.27
6′ × 6′ Sandbox364"0.440.60
10′ × 10′ Paver Bedding1001"0.310.42
10′ × 10′ Paver Bedding1002"0.620.83
12′ × 16′ Patio Bedding1921"0.590.80
12′ × 16′ Patio Bedding1922"1.191.60
16′ × 20′ Large Patio3201"0.991.33
16′ × 20′ Large Patio3202"1.982.67
20′ × 20′ Courtyard Base4001"1.231.67
20′ × 20′ Courtyard Base4002"2.473.33

Frequently Asked Questions

Paver installation requires 1 inch of compacted sand as the bedding layer on top of a compacted gravel base. For a 200 sq ft patio, that is 200 × (1/12) = 16.7 cubic feet, or about 0.62 cubic yards (roughly 0.84 tons). Enter your patio dimensions above with a 1-inch depth to get the exact amount.

Dry loose sand weighs approximately 2,700 lbs per cubic yard, which equals 1.35 US short tons. Wet or compacted sand is heavier — up to 1.5 tons/yd³. Mason sand and fine play sand are on the lighter end; coarse construction sand is on the heavier end.

Use exactly 1 inch of sand as the bedding layer for pavers — this is the industry standard. Too much sand (over 1.5 inches) causes pavers to shift and sink. The depth your calculator should include is: 6 inches of compacted gravel base + 1 inch of sand + paver thickness.

Most children sandboxes need 6–12 inches of play sand depth. A 4 ft × 6 ft sandbox at 6 inches deep requires 12 cubic feet or about 0.44 cubic yards. Use washed play sand (not construction sand) in sandboxes — it is rounded, dust-free, and safe for children.

Play sand is washed, rounded, and dust-reduced — safe for children and ideal for sandboxes. Construction sand (sharp sand, concrete sand) has angular particles that interlock and compact — used for paver bases, mortar, and drainage. Mason sand is finer and used for tuck-pointing and smooth mortar. Never use construction sand in a sandbox.

Multiply cubic yards by 1.35 to get US short tons (e.g., 5 yd³ × 1.35 = 6.75 tons). For metric, multiply cubic meters by 1.46 to get metric tonnes. Sand is often sold by the ton for large orders and by the bag for small projects.

Yes — order 10–15% extra. Sand compacts after installation, especially when wet, and some is always lost to spillage and uneven distribution. For paver bases, compact the sand before laying pavers, which will reduce the depth by 10–20%.

Bulk sand costs $10–$40 per ton depending on type and location. Play sand costs the most ($25–$40/ton), masonry sand runs $15–$30/ton, and fill sand is the cheapest ($10–$20/ton). Bagged sand costs significantly more per cubic foot — typically $5–$8 per 50-lb bag.