Free Imperial & Metric Updated Nov 2026

Concrete Slab Calculator

Estimate the concrete volume for any slab, patio, or floor in cubic yards, cubic feet, and cubic meters. Enter your length, width, and thickness; the calculator handles the unit conversions and shows the exact ready-mix order quantity. Built for contractors pouring footings to driveways and DIYers planning a single patio.

Enter Dimensions

Quick Presets:

Separate dimensions with x and entries with commas. Use positive decimal dimensions.

Enter length x width in decimal feet, separated by commas. Example: 4x5, -2x3 adds 20 ft² and deducts 6 ft². Use non-overlapping sections at the same depth.

Standard residential slabs are 4 in thick

Results

Concrete Required
1.235 yd³
Standard US ready-mix order unit

Equivalent

75 × bags 60 lb Bags (raw) Exact volume only — no waste allowance
56 × bags 80 lb Bags (raw) Exact volume only — no waste allowance
82 × bags 60 lb Bags (+ 10% waste) Recommended order quantity including 10% waste allowance
62 × bags 80 lb Bags (+ 10% waste) Recommended order quantity including 10% waste allowance
33.333 ft³ Cubic Feet
0.944 m³ Cubic Meters
Your layout

Recommended Order:  1.36  yd³

Includes 10% waste allowance (5–15% typical for this material)

Simple rectangular slabs: 5–10% is adequate. Add 15% for complex shapes or uneven subgrade.

Estimated Cost Market Rate
$123  –  $216 per cubic yard (ready-mix)

Based on current market rates. Actual cost varies by region, supplier, and project complexity.

Enter Your Price
$
Estimated total $0.00

How to measureSlab dimensions diagram

Length Width Thickness Volume = length × width × thickness
Slab dimensions diagram
Concrete slab: length × width × thickness — enter each dimension above to calculate volume.
ƒ

How the Formula Works

1

Convert thickness to feet

Thickness (ft) = Thickness (in) ÷ 12

Thickness is entered in inches, but length and width are in feet. All dimensions must share the same unit.

2

Calculate volume in cubic feet

Volume (ft³) = Length (ft) × Width (ft) × Thickness (ft)

This is the exact volume before any waste allowance is added.

3

Convert volume to cubic yards

Volume (yd³) = Volume (ft³) ÷ 27

There are 27 cubic feet in one cubic yard, which is the standard US ready-mix order unit.

4

Convert to cubic meters (optional)

Volume (m³) = Volume (ft³) × 0.0283168

Frequently Asked Questions

To find out how much concrete you need, multiply the length by the width to get the square footage, then multiply by the thickness in feet to get cubic feet. Divide by 27 to get cubic yards. Our concrete slab calculator by square feet does this automatically and includes a recommended 10% waste allowance.

A 10×10 slab at a standard 4-inch thickness requires 1.23 cubic yards of concrete (33.33 cubic feet). If you are using bags, you will need exactly 56 of the 80 lb bags, or 62 bags if you include a 10% waste allowance.

A 12×12 slab at 4 inches thick requires 1.78 cubic yards of concrete (48 cubic feet). For an exact pour, you need 80 of the 80 lb bags, but you should order 88 bags to account for 10% waste.

One 80 lb bag of concrete mix yields about 0.60 cubic feet. To find your bag count, divide your total cubic feet by 0.60. For example, a project needing 30 cubic feet will require exactly fifty 80 lb bags. Remember to order an extra 10% for spills and uneven subgrades.

First calculate the total volume in cubic feet by multiplying Length (ft) × Width (ft) × Thickness (ft). Since there are 27 cubic feet in a cubic yard, divide your total cubic feet by 27 to get the final cubic yards.

Most contractors recommend ordering 5–10% extra concrete to account for spillage, uneven subgrade, and formwork variation. Our calculator automatically provides recommended bag quantities that include a 10% waste allowance. For ready-mix orders, use the calculated cubic-yard volume and discuss the appropriate order quantity with your supplier based on site conditions.

Concrete slab costs vary by region, but standard ready-mix concrete typically ranges from $100 to $175 per cubic yard. For a 10×10 slab (1.23 cubic yards), the raw material cost is roughly $123 to $215, not including labor, delivery fees, or site preparation.

References

  1. American Concrete Institute ACI 318 – Building Code Requirements for Structural Concrete
  2. Portland Cement Association (PCA) Design and Control of Concrete Mixtures
  3. International Residential Code IRC R506 – Concrete Floors on Ground

How to Use the Concrete Slab Calculator

Whether you are planning a patio, walkway, garage slab, or shed foundation, this calculator determines the exact material volume and bag counts required for your project:

  1. Enter Dimensions: Input your slab's length and width. You can use standard imperial feet and inches or switch to metric (meters).
  2. Specify Slab Thickness: Standard residential walkways and patios use 4 inches, while driveways and garage floors typically require 4 to 6 inches to support vehicle loads.
  3. Review Results & Recommended Order: Review your exact net volume in cubic yards and cubic feet, along with the recommended order quantity factoring in a 10% waste allowance.

Popular Concrete Slab Sizes (Quick Reference)

Contractors and homeowners frequently build slabs with standard dimensions. Select an exact-dimension guide below for pre-calculated yardage, 80-lb and 60-lb bag charts, rebar requirements, and site preparation tips:

8×8 64 sq ft
8×8 Shed Slab (0.79 – 1.19 yd³)

Small Shed / Hot Tub Pad

8×10 80 sq ft
8×10 Shed Slab (0.99 – 1.48 yd³)

Garden Shed Pad

10×10 100 sq ft
10×10 Patio Slab (1.23 – 1.85 yd³)

Patio / Gazebo Pad

10×12 120 sq ft
10×12 Shed Slab (1.48 – 2.22 yd³)

Storage Shed Foundation

10×20 200 sq ft
10×20 Carport Slab (2.47 – 3.7 yd³)

Single Carport / Driveway Extension

12×12 144 sq ft
12×12 Patio Slab (1.78 – 2.67 yd³)

Backyard Patio / Pergola Slab

12×16 192 sq ft
12×16 Shed Slab (2.37 – 3.56 yd³)

Workshop / Large Shed Slab

12×20 240 sq ft
12×20 Garage Slab (2.96 – 4.44 yd³)

Single-Car Garage / RV Pad

12×24 288 sq ft
12×24 Garage Slab (3.56 – 5.33 yd³)

One-Car Garage / Boat Pad

15×15 225 sq ft
15×15 Patio Slab (2.78 – 4.17 yd³)

Medium Patio Slab

16×20 320 sq ft
16×20 Pavilion Slab (3.95 – 5.93 yd³)

Pavilion / Outbuilding Slab

20×20 400 sq ft
20×20 Garage Slab (4.94 – 7.41 yd³)

Standard Two-Car Garage Slab

20×24 480 sq ft
20×24 Garage Slab (5.93 – 8.89 yd³)

Oversized Two-Car Garage Slab

24×24 576 sq ft
24×24 Garage Slab (7.11 – 10.67 yd³)

Detached Garage / Shop Foundation

30×40 1200 sq ft
30×40 Pole Barn Slab (14.81 – 22.22 yd³)

Pole Barn / Metal Building Slab

Common Concrete Slab Sizes & Bag Counts Reference Table

The reference table below displays exact concrete volumes and estimated bag quantities for common residential slab sizes. Bag counts include a recommended 10% allowance for subgrade unevenness and form deflection:

Slab Size (ft) Typical Application Area (sq ft) Volume at 4" (yd³) Volume at 6" (yd³) 80 lb Bags (4" + 10%) 60 lb Bags (4" + 10%)
8×8 Slab Small Shed / Hot Tub Pad 64 0.79 1.19 40 53
8×10 Slab Garden Shed Pad 80 0.99 1.48 49 66
10×10 Slab Patio / Gazebo Pad 100 1.23 1.85 62 82
10×12 Slab Storage Shed Foundation 120 1.48 2.22 74 98
10×20 Slab Single Carport / Driveway Extension 200 2.47 3.7 123 163
12×12 Slab Backyard Patio / Pergola Slab 144 1.78 2.67 88 118
12×16 Slab Workshop / Large Shed Slab 192 2.37 3.56 118 157
12×20 Slab Single-Car Garage / RV Pad 240 2.96 4.44 147 196
12×24 Slab One-Car Garage / Boat Pad 288 3.56 5.33 176 235
15×15 Slab Medium Patio Slab 225 2.78 4.17 138 184
16×20 Slab Pavilion / Outbuilding Slab 320 3.95 5.93 196 261
20×20 Slab Standard Two-Car Garage Slab 400 4.94 7.41 245 326
20×24 Slab Oversized Two-Car Garage Slab 480 5.93 8.89 294 392
24×24 Slab Detached Garage / Shop Foundation 576 7.11 10.67 352 470
30×40 Slab Pole Barn / Metal Building Slab 1200 14.81 22.22 734 978

Recommended Slab Thickness by Project Type

Selecting the appropriate slab thickness ensures structural longevity and prevents premature cracking:

  • Sidewalks, Walkways & Garden Paths (4 inches): A 4-inch pour over a compacted gravel sub-base provides plenty of support for standard pedestrian foot traffic and lawnmowers.
  • Patios & Outdoor Living Areas (4 inches): 4 inches is standard for dining tables, fire pits, and grills. If supporting an outdoor stone fireplace or heavy brick pillars, thicken the edges or pour dedicated footings.
  • Shed Foundations & Hot Tub Pads (4 to 6 inches): Small tool sheds (under 100 sq ft) perform well at 4 inches. Hot tub pads, swim spas, and heavy utility workshops should be poured at 5 to 6 inches with #4 rebar reinforcement.
  • Residential Driveways & Garage Floors (4 to 5 inches): Cars, SUVs, and light pickup trucks require a minimum 4-inch slab with 4,000 PSI concrete and wire mesh or rebar. For regular parking of 3/4-ton or 1-ton trucks, pour 5 inches.
  • Heavy RV, Boat, or Commercial Equipment Pads (6 inches): Heavy motorhomes and equipment trailers require a full 6-inch pour over a minimum 6-inch compacted aggregate base with rebar spaced at 12 inches on-center.

Ready-Mix Truck vs. Bagged Concrete Breakeven Guide

Deciding between mixing bags by hand and ordering a ready-mix concrete delivery truck generally comes down to total volume and available labor:

  • Under 1 Cubic Yard (Under 45–50 Bags): Mixing bagged concrete using a rented electric drum mixer or wheelbarrow is generally the most economical choice. Ready-mix companies charge "short-load fees" (often $100 to $200 extra) for orders under 4 to 5 yards, making small truck deliveries cost-prohibitive.
  • 1 to 2 Cubic Yards (45 to 90 Bags): This is the transitional zone. Mixing 70 to 90 eighty-pound bags requires substantial manual labor and hours of mixing. Consider a volumetric "mix-on-site" mobile concrete service, which dispenses the exact yardage required with zero waste and no short-load penalty.
  • Over 2 Cubic Yards (90+ Bags): Ready-mix truck delivery is strongly recommended. Hand-mixing 100+ bags risks "cold joints" (where one batch hardens before the next is poured, weakening the slab). Ready-mix delivers a uniform, pre-tested mix that can be discharged, screeded, and bull-floated in a single continuous pour.