How Much Concrete Do You Need for a 24×24 Slab?
Calculate the exact ready-mix yardage, 80-lb and 60-lb bag counts, subbase gravel, and rebar reinforcement needed for a 24×24 concrete slab (576 sq ft).
Exact net volume: 7.11 yd³ (192 cu ft)
Standard application: Pedestrian walkways, back patios, gazebo bases, small garden sheds.
Exact net volume: 10.67 yd³ (288 cu ft)
Heavy-duty application: Garage floors, carports, RV pads, hot tub foundations, machinery shops.
How to measureSlab dimensions diagram
24×24 Slab Concrete Volume & Bag Chart
Reference table comparing exact net volume and recommended order amounts across standard residential slab thicknesses for 576 square feet:
| Slab Thickness | Recommended For | Net Cu Ft | Net Cu Yds | Order (Yds + 10%) | 80 lb Bags (+10%) | 60 lb Bags (+10%) |
|---|---|---|---|---|---|---|
| 4 Inches | Sidewalks, Patios, Light Sheds | 192 ft³ | 7.11 yd³ | 7.82 yd³ | 352 | 470 |
| 5 Inches | Workshops, Carports, Light Trucks | 240 ft³ | 8.89 yd³ | 9.78 yd³ | 440 | 587 |
| 6 Inches Recommended | Two-Car Garages, RVs, Hot Tubs | 288 ft³ | 10.67 yd³ | 11.73 yd³ | 528 | 704 |
| 8 Inches | Heavy Machinery, Farm Slabs | 384 ft³ | 14.22 yd³ | 15.64 yd³ | 704 | 939 |
* Bag calculations assume 0.60 cu ft per 80-lb bag and 0.45 cu ft per 60-lb bag, with a 10% safety allowance for subbase compaction and forms.
Engineering & Code Specifications for a 24×24 Slab
Guidelines aligned with American Concrete Institute standard ACI 302.1R (Guide for Concrete Floor and Slab Construction) and IRC Section R506:
Subbase & Compaction
6" to 8" compacted crushed stone over non-woven geotextile fabric with 15-mil vapor barrier
Rebar & Mesh Reinforcement
#4 rebar at 16" on-center each way with two #5 continuous perimeter bars in turn-down edge
Contraction & Control Joints
Cut into four 12×12 ft panels (saw joints at 12 ft along each axis)
Mix Strength & Curing
Specify 3,500 to 4,000 PSI ready-mix concrete with 5% to 7% air entrainment in cold climates. Moist cure with wet burlap or spray a curing compound (ASTM C309) for a minimum of 7 days before traffic.
Project Design Notes for 24×24 (Detached Garage / Shop Foundation)
A 24×24 slab (576 sq ft) is the premier detached garage and auto-enthusiast workshop size. At 6" thickness with 4,000 PSI concrete, this slab safely supports automotive lifts, floor jacks, and full-size work trucks. Ensure a 10-mil to 15-mil vapor barrier is taped continuously to prevent epoxy floor delamination.
Estimated Cost for a 24×24 Concrete Slab
Concrete material cost delivered to your jobsite ($125 to $165 per cubic yard). Excludes wooden forms, rebar, gravel subbase, and tool rental.
Typical contractor turnkey rate ($6 to $12 per sq ft for 576 sq ft). Covers site excavation, formwork, crushed stone base, rebar grid, pour, screed, and broom finish.
Explore Other Concrete Slab Sizes
Frequently Asked Questions: 24×24 Slab
How many cubic yards of concrete do I need for a 24x24 slab at 4 inches thick?
For a 24×24 slab at 4 inches thick (576 sq ft), you need exactly 7.11 cubic yards (192 cubic feet) of concrete. When ordering ready-mix concrete, contractors recommend adding a 10% waste allowance for subbase irregularities and spillage, bringing your recommended order to 7.82 cubic yards. The formula is: (24 ft × 24 ft × 0.333 ft) ÷ 27 = 7.11 yd³.
How many 80 lb bags of Quikrete do I need for a 24x24 slab?
For a 4-inch thick 24×24 slab, you will need 352 eighty-pound bags of concrete (or 470 sixty-pound bags), which includes a 10% safety margin. If pouring a heavy-duty 6-inch slab, you will need 528 eighty-pound bags (or 704 sixty-pound bags). Each standard 80-lb bag yields approximately 0.60 cubic feet of mixed concrete.
Should a 24x24 slab be 4 or 6 inches thick?
Choose your slab thickness based on intended use: A 4-inch pour (7.82 yd³ with waste) is standard for pedestrian patios, walkways, and small garden sheds holding under 100 sq ft. A 5 to 6-inch pour (11.73 yd³ with waste) reinforced with #4 rebar on an aggregate subbase is strongly recommended for garage floors, carports, RV pads, hot tubs, or any application supporting vehicle axle weights per ACI 302.1R and IRC R506.
How much does a 24x24 concrete slab cost?
Ready-mix concrete delivery costs between $125 and $165 per cubic yard. For a 4-inch 24×24 slab (7.82 yd³ ordered), materials will cost approximately $978 to $1290. For a 6-inch slab (11.73 yd³ ordered), ready-mix concrete runs $1466 to $1935. A complete turnkey installation by a concrete contractor (including grading, forms, gravel base, rebar, pour, and finishing) typically ranges from $6.00 to $12.00 per sq ft, or $3,456 to $6,912 total for 576 sq ft.