How Much Concrete Do You Need for a 20×24 Slab?
Calculate the exact ready-mix yardage, 80-lb and 60-lb bag counts, subbase gravel, and rebar reinforcement needed for a 20×24 concrete slab (480 sq ft).
Exact net volume: 5.93 yd³ (160 cu ft)
Standard application: Pedestrian walkways, back patios, gazebo bases, small garden sheds.
Exact net volume: 8.89 yd³ (240 cu ft)
Heavy-duty application: Garage floors, carports, RV pads, hot tub foundations, machinery shops.
How to measureSlab dimensions diagram
20×24 Slab Concrete Volume & Bag Chart
Reference table comparing exact net volume and recommended order amounts across standard residential slab thicknesses for 480 square feet:
| Slab Thickness | Recommended For | Net Cu Ft | Net Cu Yds | Order (Yds + 10%) | 80 lb Bags (+10%) | 60 lb Bags (+10%) |
|---|---|---|---|---|---|---|
| 4 Inches | Sidewalks, Patios, Light Sheds | 160 ft³ | 5.93 yd³ | 6.52 yd³ | 294 | 392 |
| 5 Inches | Workshops, Carports, Light Trucks | 200 ft³ | 7.41 yd³ | 8.15 yd³ | 367 | 489 |
| 6 Inches Recommended | Two-Car Garages, RVs, Hot Tubs | 240 ft³ | 8.89 yd³ | 9.78 yd³ | 440 | 587 |
| 8 Inches | Heavy Machinery, Farm Slabs | 320 ft³ | 11.85 yd³ | 13.04 yd³ | 587 | 783 |
* Bag calculations assume 0.60 cu ft per 80-lb bag and 0.45 cu ft per 60-lb bag, with a 10% safety allowance for subbase compaction and forms.
Engineering & Code Specifications for a 20×24 Slab
Guidelines aligned with American Concrete Institute standard ACI 302.1R (Guide for Concrete Floor and Slab Construction) and IRC Section R506:
Subbase & Compaction
6" crushed stone base compacted to 95% density in 3" layers
Rebar & Mesh Reinforcement
#4 rebar (1/2") in an 18" grid throughout with perimeter thickened edge
Contraction & Control Joints
Saw-cut joints dividing the 20×24 slab into six 10×8 ft panels
Mix Strength & Curing
Specify 3,500 to 4,000 PSI ready-mix concrete with 5% to 7% air entrainment in cold climates. Moist cure with wet burlap or spray a curing compound (ASTM C309) for a minimum of 7 days before traffic.
Project Design Notes for 20×24 (Oversized Two-Car Garage Slab)
A 20×24 slab (480 sq ft) provides room for two full-size trucks or SUVs plus 4 feet of front tool storage and workbench space. Place isolation joint strips along foundation stem walls and saw-cut contraction joints to a depth of 1.25" to 1.5" within 18 hours of placement.
Estimated Cost for a 20×24 Concrete Slab
Concrete material cost delivered to your jobsite ($125 to $165 per cubic yard). Excludes wooden forms, rebar, gravel subbase, and tool rental.
Typical contractor turnkey rate ($6 to $12 per sq ft for 480 sq ft). Covers site excavation, formwork, crushed stone base, rebar grid, pour, screed, and broom finish.
Explore Other Concrete Slab Sizes
Frequently Asked Questions: 20×24 Slab
How many cubic yards of concrete do I need for a 24x20 slab at 4 inches thick?
For a 20×24 slab at 4 inches thick (480 sq ft), you need exactly 5.93 cubic yards (160 cubic feet) of concrete. When ordering ready-mix concrete, contractors recommend adding a 10% waste allowance for subbase irregularities and spillage, bringing your recommended order to 6.52 cubic yards. The formula is: (24 ft × 20 ft × 0.333 ft) ÷ 27 = 5.93 yd³.
How many 80 lb bags of Quikrete do I need for a 24x20 slab?
For a 4-inch thick 20×24 slab, you will need 294 eighty-pound bags of concrete (or 392 sixty-pound bags), which includes a 10% safety margin. If pouring a heavy-duty 6-inch slab, you will need 440 eighty-pound bags (or 587 sixty-pound bags). Each standard 80-lb bag yields approximately 0.60 cubic feet of mixed concrete.
Should a 24x20 slab be 4 or 6 inches thick?
Choose your slab thickness based on intended use: A 4-inch pour (6.52 yd³ with waste) is standard for pedestrian patios, walkways, and small garden sheds holding under 100 sq ft. A 5 to 6-inch pour (9.78 yd³ with waste) reinforced with #4 rebar on an aggregate subbase is strongly recommended for garage floors, carports, RV pads, hot tubs, or any application supporting vehicle axle weights per ACI 302.1R and IRC R506.
How much does a 24x20 concrete slab cost?
Ready-mix concrete delivery costs between $125 and $165 per cubic yard. For a 4-inch 20×24 slab (6.52 yd³ ordered), materials will cost approximately $815 to $1076. For a 6-inch slab (9.78 yd³ ordered), ready-mix concrete runs $1223 to $1614. A complete turnkey installation by a concrete contractor (including grading, forms, gravel base, rebar, pour, and finishing) typically ranges from $6.00 to $12.00 per sq ft, or $2,880 to $5,760 total for 480 sq ft.