Free Imperial & Metric Updated Nov 2026

Concrete Column Calculator

Work out the concrete needed to fill round columns, piers, and tube forms. Enter the diameter and height and the calculator returns volume per column and for your full count. Useful for deck piers, porch posts, and Sonotube pours.

Enter Dimensions

Separate dimensions with x and entries with commas. Use positive decimal dimensions.

Common sonotube sizes: 8 in, 10 in, 12 in, 16 in.

Results

80 lb Bags Required
4 bags
Based on 0.60 ft³ yield per 80 lb bag
0.081 yd³ Cubic Yards
2.182 ft³ Cubic Feet
0.062 m³ Cubic Meters
Your layout
Enter Your Price
$
Estimated total $0.00

How to measureConcrete Column Diagram

Diameter Height
Concrete Column Diagram
Measure the inside diameter across the center of the round form and the poured height. Enter the number of identical columns separately.
ƒ

How the Formula Works

1

Calculate cross-sectional area

Area (ft²) = π × (Diameter ÷ 2)²

Converts diameter in inches to radius in feet before squaring

2

Calculate volume of one column

Volume (ft³) = Area × Height (ft)
3

Scale to all columns

Total Volume = Volume per column × Number of columns
4

Calculate bags required

Bags = ⌈Total ft³ ÷ 0.60⌉

One 80 lb bag of concrete yields approximately 0.60 cubic feet

Frequently Asked Questions

Use the cylinder formula: Volume = π × r² × height. Convert diameter to radius (diameter ÷ 2), convert all measurements to feet, then multiply. For a 10-inch diameter, 4-foot tall sonotube: r = 10/2/12 = 0.417 ft, Volume = 3.14159 × 0.417² × 4 = 2.18 ft³. Divide by 0.60 to get bags: ⌈2.18 ÷ 0.60⌉ = 4 bags. This calculator does the math for any size.

Deck pier sizing depends on load and local frost depth. Common residential deck footings use 10-inch (250 mm) sonotubes for interior posts and 12-inch (300 mm) for corner or heavily loaded posts. Your local building code specifies minimum diameter and depth requirements — depth must extend below the frost line, which ranges from 12 inches in warm climates to 60+ inches in cold northern regions.

An 80 lb bag of concrete yields approximately 0.60 cubic feet. Common sonotube volumes: 8 in × 3 ft deep = 1.05 ft³ = 2 bags; 10 in × 4 ft deep = 2.18 ft³ = 4 bags; 12 in × 4 ft deep = 3.14 ft³ = 6 bags; 16 in × 4 ft deep = 5.59 ft³ = 10 bags. For large projects, ordering ready-mix concrete is more economical than bags.

Pier footings must extend below the local frost depth to prevent heaving. Minimum depths by region: Southern US (no frost) 12–18 inches, Mid-Atlantic 24–30 inches, Midwest 36–42 inches, Northern states and Canada 48–60+ inches. Check your local building code — many jurisdictions require engineered footings for decks and structures. The frost depth map from your local authority is the authoritative reference.

A concrete footing is a horizontal pad that distributes load over a wide area of soil. A concrete pier (or column) is a vertical cylinder that transfers load down to below the frost line. Most deck and post construction uses a combination: a round sonotube pier that sits on a flared footing bell, or a simple cylindrical tube poured full depth. This calculator covers the cylindrical pier volume — add a separate calculation for any footing bell.

Bagged concrete is practical for up to about 10–15 bags per project. Mix one bag at a time in a wheelbarrow or use a small mixer. For larger projects (20+ bags or multiple large tubes), ready-mix concrete is faster, cheaper per cubic yard, and produces more consistent results. Ready-mix is typically sold in 1-yard minimum loads — use this calculator to see if your total volume justifies an order.

An 80 lb bag of concrete costs $5–$8. A 10-inch × 4-foot sonotube needs 4 bags at $6 each = $24 in material. For 8 deck piers of the same size: 32 bags = $192–$256 in concrete alone. Add sonotube forms ($8–$20 each), rebar or post-base hardware ($10–$30 per pier), and labor. Ready-mix at $150–$200 per yard becomes cost-competitive when total volume exceeds 0.5 cubic yards.

Calculate the volume for a single column (π × r² × height) and multiply by the number of columns. Enter the count in the "Number of Columns" field above — the calculator handles the multiplication automatically and gives you the total bags and volume for the entire project in one step.

How to Use the Concrete Column & Sonotube Calculator

Whether you are pouring deck footings, pole barn columns, pergola piers, or sign bases, this calculator determines the exact concrete volume in cubic yards, cubic feet, and 80-lb / 60-lb bags for cylindrical form tubes:

  1. Enter Tube Diameter: Select or input the inside diameter of your cardboard form tube (Sonotube) in inches or millimeters.
  2. Specify Hole Depth: Enter your total pier depth. In freezing climates, this must extend beneath your local building code frost line (typically 36" to 48" deep in northern states).
  3. Set Pier Quantity: Enter the number of identical piers to get an immediate project total including cubic yardage and bags.

Popular Sonotube & Pier Diameters (Quick Reference)

Builders and deck installers routinely use standard form tube diameters. Explore our exact-diameter guides complete with 80-lb and 60-lb bag charts, frost depth requirements, and rebar recommendations:

Sonotube Pier Concrete Bags & Volume Reference Table

Reference table showing exact concrete requirements per pier across standard cylindrical form tube diameters. Sacks are 80-lb Quikrete bags (0.60 cu ft yield) including a 10% hole irregularity safety margin:

Tube Diameter Typical Application 3 ft Depth (80 lb) 4 ft Depth (80 lb) 3 ft Volume (ft³) 4 ft Volume (ft³) Estimated Load (lbs)
6-Inch Pier Fence Posts & Light Pergolas 2 bags 2 bags 0.59 ft³ 0.79 ft³ ~2,500 – 4,000 lbs (soil dependent)
8-Inch Pier Small Decks, Steps & Privacy Fences 2 bags 3 bags 1.05 ft³ 1.4 ft³ ~5,000 – 7,500 lbs
10-Inch Pier Standard Residential Deck Footings 3 bags 4 bags 1.64 ft³ 2.18 ft³ ~8,000 – 12,000 lbs
12-Inch Pier Large Decks, Porches & Gazebo Piers 5 bags 6 bags 2.36 ft³ 3.14 ft³ ~12,000 – 18,000 lbs
16-Inch Pier Heavy Structural Piers & Carports 8 bags 11 bags 4.19 ft³ 5.59 ft³ ~20,000 – 30,000 lbs
18-Inch Pier Pole Barns & Commercial Sign Bases 10 bags 13 bags 5.3 ft³ 7.07 ft³ ~30,000 – 45,000 lbs
24-Inch Pier Heavy Foundation Caissons & Bell Piers 18 bags 24 bags 9.42 ft³ 12.57 ft³ ~50,000 – 80,000+ lbs

Frost Depth Code & Structural Guidelines

When casting cylindrical concrete piers in the ground, local building departments enforce strict depth and structural standards:

  • IRC Frost Depth Compliance: Section R403.1.4 of the International Residential Code specifies that all exterior footings must extend below the established frost line. Placing footings above the frost depth risks catastrophic frost heave during winter freezing cycles. Consult our US Frost Depth Reference Table by State to verify code depths for your county.
  • Concrete Compressive Strength (3,000 vs 4,000 PSI): While 2,500 to 3,000 PSI concrete is suitable for lightweight post holes, structural piers supporting habitable room additions and high decks require 3,500 to 4,000 PSI concrete (such as Quikrete 5000) for maximum freeze-thaw durability. Review our Concrete Mix Comparison Guide for slump targets and cure timelines.
  • Pier Belled Base: For low-bearing soils (under 1,500 PSF bearing pressure), flare the bottom of the augered hole using a manual bell-bottom tool or install a plastic footing form (like Bigfoot Systems) before setting the Sonotube.