Free Imperial & Metric Updated Nov 2026

Grout Calculator

Estimate tile grout volume and bag counts for floors and walls. Enter the tile size, joint width, and area, and the calculator returns the grout volume and bags needed to fill the joints. Accurate joint-fill math means fewer mid-job supply runs.

Enter Dimensions

Tile length in inches. Common: 12″, 18″, 24″.

Tile width in inches. Use same value as length for square tiles.

Grout joint width in inches. Common: 1/16″ (rectified tiles), 1/8″ (standard), 3/16″–1/4″ (larger tiles).

Tile thickness in inches. Common: 3/8″ (floor tile), 1/4″ (wall tile).

Total tiled area in square feet.

Yield per bag in cubic feet from the bag label.

Add 10% for typical installations; more for diagonal layouts.

Results

Mixed grout including waste
2.028 L
Bag estimates depend on the selected product yield.
Measurement Value Unit
Tiled Area 100 ft²
Tiled Area 9.29 m²
Tile Count Tiles needed including waste 110 tiles
Grout Volume Adjusted grout volume including waste 0.072 ft³
Grout Volume 0.002 m³
Illustrative Bags (net) 1 bags
Illustrative Bag Estimate Assumption-based estimate including waste; verify selected product coverage before ordering 1 bags
Your layout
Enter Your Price
$
Estimated total $0.00

How to measureGrout Diagram

Top view · one tile Tile length Tile width Side view · joint enlarged Joint width Tile thickness Grout between tile edges
Grout Diagram
Measure one tile face and the clear gap between tiles. The calculator models grout filling the joint to the entered tile thickness. Use the selected grout product’s mixed yield for a bag estimate.
ƒ

How the Formula Works

1

Calculate tiled area

Area = Length × Width (of the room or surface)

Measure the total surface area to be tiled in square feet (or square metres). For rooms with cabinets, islands, or fixtures, deduct those footprints if they are significant — for small obstacles, leaving them in provides a useful material buffer.

2

Calculate grout volume per square foot

Grout/ft² = Joint Width × Tile Depth × (Tile L + Tile W) ÷ (12 × Tile L × Tile W)

With all dimensions in inches, this is an approximate small-joint volume of grout within one square foot of installed tile. Larger tiles have fewer joints per square foot and therefore use less grout per ft² than small mosaic tiles with the same joint width.

3

Calculate total grout volume

Total Grout = Area × Grout per ft²

Multiply the tiled area by the per-square-foot grout volume. Example: 100 ft² of 12×12 tile with 1/8″ joints and 3/8″ depth → grout/ft² ≈ 0.000651 ft → net total ≈ 0.0651 ft³.

4

Apply waste factor

Adjusted Grout = Total Grout × (1 + Waste %)

Use 10% for standard straight-lay patterns. Increase to 15% for diagonal (45°) layouts and areas with many complex cuts around fixtures, outlets, or irregular edges.

5

Calculate bags required

Bags = ⌈Adjusted Grout ÷ Yield per Bag⌉

Bag yields shown in the presets are unverified illustrative assumptions. Select Custom and enter the mixed yield from the chosen grout product data sheet. Confirm bag or kit mass, water addition, tile dimensions, joint width/depth and waste. The small-joint volume approximation does not verify product coverage.

Frequently Asked Questions

Multiply your tiled area by the grout volume per square foot — which depends on tile size, joint width, and tile thickness. The formula is: Grout/ft² = Joint Width × Tile Depth × (Tile L + Tile W) ÷ (12 × Tile L × Tile W). This calculator handles all the math once you enter your tile dimensions, joint width, and area.

Use the selected grout manufacturer instructions for permitted joint widths and tile compatibility. Sanded, unsanded, epoxy and premixed products have different limitations; joint width alone does not select a suitable product.

With 1/8″ joints and 3/8″ tile depth: grout volume per ft² ≈ 0.000651 ft³, so 100 ft² requires about 0.0651 ft³ net. With the illustrative 25 lb bag assumption (0.45 ft³ yield) and 10% waste, you need 1 bag. Larger joints or thicker tiles will increase this amount.

Choose joint width from the tile and grout manufacturer instructions and the project specification. This calculator estimates volume for the entered width; it does not determine an installation minimum.

A 25 lb bag is the most common choice for residential bathroom, kitchen, and floor projects. Use a 50 lb bag for large commercial floors to reduce the number of bags to mix. A 10 lb bag is ideal for repairs, small backsplash areas, or touch-ups.

Follow the selected grout technical data sheet for curing, traffic, water exposure and sealing. A generic curing time is not valid for all grout products.

Epoxy grout coverage is similar by volume to cement grout, but epoxy is sold in pre-measured kits rather than by the bag. Use this calculator to determine the grout volume you need, then match that volume to the coverage chart on the epoxy grout kit you plan to purchase.

Sanded grout in a standard 25 lb bag typically costs $12–20. Unsanded grout runs $15–25 per 25 lb bag. Epoxy grout kits are $30–60 each. Prices vary by brand, retailer, and region. For larger jobs, buying 50 lb bags generally offers better value per cubic foot.