Exact Wall Guide 160 Sq Ft Single Garage / Workshop Wall

How Many Concrete Blocks Do You Need for a 8×20 Ft Wall?

Estimate standard 8×8×16 CMU block count, 80-lb mortar bags, core fill grout volume, and illustrative reinforcement quantities for a 8 ft high by 20 ft long block wall (160 sq ft).

Instant Materials Summary: 8×20 Ft (160 sq ft)
Standard 8×8×16 CMU • ⅜" Mortar Joints • 5% Waste
Standard 8×8×16 Blocks
189
180 net blocks + 5% waste (9 spare blocks)
Mortar Bags (Selected Product)
Requires product specifications
Enter product data in the calculator below
Wall Layout Courses
12 High
15 blocks per horizontal course
Core Fill Grout
1.87 yd³
0.75 yd³ at assumed 40% fill; confirm core geometry

Estimator Rule of Thumb: 1 square foot of concrete block wall requires exactly 1.125 nominal 8×8×16 CMU blocks. For a 160 sq ft wall, multiply 160 × 1.125 = 180 net blocks. This estimate adds a 5% order allowance; confirm cuts, openings and wastage against the actual wall layout.

Customize Wall Dimensions & Waste

Adjust wall height, length, or waste percentage below to recalculate materials with instant live updates.

Enter Dimensions

Quick Presets:

Add 5–10% for cuts, breakage, and irregular corners.

Advanced: manufacturer-specific mortar coverage (optional)

Mortar only, not core grout or tile grout. Coverage must match the entered bag and masonry conditions. Advanced dimensions use mm and volumes use liters in both unit systems.

Coverage or mixed yield must be for this bag mass. Changing mass does not automatically rescale your supplied coverage.

Use the selected product specification; no default is assumed.

Use the selected product specification; no default is assumed.

Use the selected product specification; no default is assumed.

Use the selected product specification; no default is assumed.

Block counts retain nominal 8x16-inch imperial or 200x400-mm metric faces. Use product data matching that module. Actual dimensions and bedding record coverage conditions; they do not recalculate blocks or infer mortar volume.

Use the selected product specification; no default is assumed.

Use the selected product specification; no default is assumed.

Use the selected product specification; no default is assumed.

0 means no additional allowance. Coverage is applied to the block order, which already includes block waste. Avoid counting supplier waste twice.

Results

Concrete Blocks
189 blocks
Standard 8×8×16 in CMU, includes waste factor
Measurement Value Unit
Gross wall height in nominal courses 12
Gross course length in nominal units 15
Mortar Bags (selected product) Requires valid product coverage and matching bag/masonry specifications in Advanced 0 bags
Wall Area Gross wall face area before deductions 160 ft²
Wall Area 14.86 m²
Your layout

Recommended Order:  189  blocks

Includes 5% waste allowance (3–5% typical for this material)

CMU blocks have very low waste. Order 5% extra to cover broken blocks and end cuts.

Enter Your Price
$
Estimated total $0.00

How to measureCMU Block Wall Diagram

Wall length Wall height One block face
CMU Block Wall Diagram
Measure the wall face and deduct openings. Block count uses nominal face size. Mortar bags require product coverage or mixed yield and bedding details.

Geometry Summary for 8×20 Ft Wall

Reinforcement quantities below are hypothetical allowances, not a reinforcement schedule. Bar lengths do not establish cutting, lap or anchorage requirements; use approved plans.

  • Wall Face Area: 160 sq ft (14.9 m²)
  • Wall Height: 8 ft (12 courses @ 8" each)
  • Wall Length: 20 ft (15 units @ 16" each)
  • Mortar Mix: Use the product-specific calculator below
  • Example Vertical Rebar (#4): 9 bars @ 32" o.c. (90 lin ft)
  • Example Horizontal Ladder Wire: 12 strips (10-ft lengths @ 16" vert)

CMU Block Size Comparison for a 8×20 Ft Wall

Compare nominal block geometry for this 160 sq ft wall. Mortar coverage must be supplied separately for each block width and bedding method; no universal bags-per-block conversion is assumed. Enter matching product specifications in the calculator. Weights and core-fill volumes also require the selected block specification.

Nominal Block Size Actual Size Block Weight Net Blocks Total (+5%) Mortar Bags Solid Grout Reinforcement Selection
6×8×16 CMU 5⅝" × 7⅝" × 15⅝" 28 lbs 180 189 Product specifications required 1.27 yd³ Use approved reinforcement plans
8×8×16 CMU (Standard) Most Common 7⅝" × 7⅝" × 15⅝" 38 lbs 180 189 Product specifications required 1.87 yd³ Use approved reinforcement plans
12×8×16 CMU 11⅝" × 7⅝" × 15⅝" 55 lbs 180 189 Product specifications required 2.93 yd³ Use approved reinforcement plans

CMU Wall Engineering & Code Requirements

Planning considerations for material estimates; use approved details and applicable building requirements for structural design.

1. Running Bond & ⅜" Mortar Joints

Follow the specified bond, mortar type, joint dimensions and finishing method for the selected units. The nominal module used for quantity arithmetic does not prescribe a bond or installation detail.

2. Poured Footing Depth & Width

Use the approved foundation schedule for footing dimensions, founding depth and reinforcement. Wall thickness alone does not establish a safe footing size.

3. Vertical Rebar & Grouting

Use the approved reinforcement and grout schedule for bar size, spacing, dowels, anchorage, filled cores and grout properties. Follow the specified placement and consolidation procedure; this estimator does not establish these requirements.

4. Top Bond Beam & Control Joints

Use the approved details for bond beams, horizontal reinforcement and control joints. The calculator does not design these details or establish a universal joint spacing.

Application Profile: Single Garage / Workshop Wall

This 8 ft high by 20 ft long wall has 160 sq ft of face area. Quantities use the stated nominal block module and waste allowance; they do not establish a safe wall design, fire rating or reinforcement schedule. Obtain footing, drainage, reinforcement, grout and movement-joint details from approved plans and applicable requirements. Enter matching product coverage for mortar.

Frequently Asked Questions: 8×20 Ft Block Wall

Block-count arithmetic, product-dependent mortar estimates and core-grout assumptions explained.

How many concrete blocks do I need for a 8x20 wall?

For a 8 ft high by 20 ft long concrete block wall (160 sq ft), you need 189 standard 8×8×16 CMU blocks. This includes 180 net blocks plus a standard 5% waste allowance for cuts and corner fitting. The wall stands 12 courses tall with 15 blocks per horizontal course in a standard running bond pattern.

How many bags of mortar do I need for a 8x20 block wall?

Mortar bag estimates require product specifications. Open Advanced in the calculator and enter coverage or mixed yield plus verified consumption per block, matching bag mass, actual block dimensions, joints and bedding. The same product calculation is used on the parent page. Core grout is separate.

How much grout do I need to fill the block cores for a 8x20 wall?

The full-core estimate is 1.87 cubic yards using an assumed 0.28 cubic feet per net block. The partial-fill example is 0.75 cubic yards, calculated as 40% of the rounded full-fill volume. A 32-inch bar spacing alone does not establish that fill fraction. Confirm actual core geometry and the approved filled-cell schedule; masonry core grout is not tile grout.

What rebar and reinforcement is required for a 8x20 CMU wall?

Use the reinforcement schedule from approved plans for vertical bars, horizontal reinforcement, cover, anchorage and splices. The numerical allowances on this page are estimating examples, not code-required reinforcement or a structural design.